|
This page is under construction. |
 |
Pump: Pump 110v AC Submersible bilge pump style For circulating water. Price: $150.00 |
  |
Pump: 12v DC Submersible bilge pump style For circulating water. Price: $150.00 Power supply: 12 volt supply with variable voltage and digital display. Allows control over water flow rate. Price: $50.00 |
 |
Bucket: Bucket . White Plastic, with 0.75” hole cut for tap at bottom 5 gallons (20 litres) capacity Rectangular dimensions Price: $60.00 Lid for bucket: Price: $5.00 |
 |
Tap/faucet: for bucket, with washers, nut Install the tap into hole and tighten by hand Price: $40.00 |
 |
Adapter rod, nuts: Allow one domestic electrode to be mounted on commercial bar Needed if making colloidal gold, platinum, palladium Price: $40.00 for two |
 |
Cable for large electrodes: 6’ long Connects 6”x 8” plates to generator Each cable has two conductors for one pair Price: $40.00 |
 |
Cross-bar: 12” long for Commercial colloidal generators with 16 holes drilled to support 2 pairs of large 6x8 plates Can support two pairs of extra large plates of 6” x 8” or 6” x 12” Price: $50.00 |
 |
Cross-bar: 24” long for larger containers such as 55 gallons with 24 holes drilled to support 3 pairs of large 6x8 plates Can support three pairs of extra large plates of 6” x 8” or 6” x 12” Price: $60.00 |
 |
Magnet: to restructure water. Donut shaped Fits around the pump outlet. Price: $20.00 |
 |
Manifolds: Four or six channels. We supply copper manifolds having a tap on each port (branch), in order to be able to isolate any cylinder for electrode replacement or cleaning. Two manifolds are needed in each system. One for inlet pipe and one for the outlet pipe. We can supply vinyl tubing and circular clamps to connect all of the ports. Please contact us for prices. |
 |
Flow-Meter: Aquarium model: It is important to know the flow rate when using an UV Sterilizer, Wet Dry Filter and/or Canister Filter because a reduction of water flow can be an indicator for the need for filter maintenance. Ideal for UV Sterilizers, Wet Dry Filters And Canister Filters. The flow rate is conveniently indicated by visually checking the position of the float indicator against the graduated flow scale. Measures Flow Rate 50gph – 250gph. 3/4" hose barb fittings on each end or if you remove these adapters you have 3/4" MPT (male pipe thread) to add your own fittings. 1. Measures pump flow rates in either gallons or liters (200gph to 500gph, 757l/h-1900l/h) 2. For use with canister filters and pond filters 3. Displays instantaneous velocity 4. Flow meter must be positioned upright to work properly 5. Accepts 3/4" hose or hard piping Please contact us for prices. |
 |
Digital Flow Meter model: 2.0 to 40.0 L/min Hot and Cold Water Flow Sensor Our new larger digital flow sensor for flow up to 40 Liters per minute displays 1) real-time flow and 2) accumulated total flow up to 100,000 litres. It can be mounted at any angle. This unit uses a plastic coated magnet and turbine and is suitable and is ideal for use in water conservation systems, storage tanks, hot water systems, irrigation systems, cooling towers, swimming pools and much more. The sensors are solidly constructed and provide a digital pulse each time an amount of water passes through the pipe. The output can easily be connected to a microcontroller for monitoring water usage and calculating the amount of water remaining in a tank etc. This flow sensor is available in three models for ¼”, ½” or 3/4" standard pipe and can be easily inserted into a standard piping system. A wide supply voltage can be connected to the unit. The unit is constructed of long-life polymer and is suitable for outdoor mounting. These easy to connect units are ideal for use in environmentally friendly water management systems. Flow rate display from 2.4 – 60.0 liter/min. Please contact us for prices. |
.png) |
Water Flow Sensor Switch For Horizontal and Vertical Mounting: Monitors flow to switch on or off pump and ionizers, capacity 1-30 L/min. This unique versatile flow switch closes a magnetic switch contact when the water flow reaches a small flow of 8 liters per minute. This can then be used to control a valve, pump, light or indicate a warning on the alarm panel. This flow switch is suitable for hose mounting with a 22m (7/8”) internal diameter caliber for fixing and clamping the hose. The switch can be mounted vertically or horizontally, unlike other switches. Approved for use with drinking water and can also be used in fuel systems. The switch is protected against corrosion with the use of nylon construction for long life and reliable operation. The contact is suitable for switching up to 1A with voltages up to 230Vdc. The maximum flow rate for this unit is 30 liters per minute. Please contact us for prices. For AC pumps we can supply a relay to switch large currents. |
 |
Water Flow Sensor Switch: Monitors flow to switch on or off pump and ionizers, capacity 1-30 L/min. Please contact us for prices. |
.png)  |
Conductivity Meter: This is a small professional quality microSiemens meter specially chosen for the required range of our colloidal mineral water application (0-999 uS). Do not use a TDS meter which gives false results. We can supply advanced meters to measure pH, ORP, dissolved oxygen etc. . One uS is approximately equal to 1 ppm. Price is $140 for this basic model and $1000 for the comprehensive model |